Specifications*
|
HM1642 Lathe
|
HM1642B Lathe
|
| Max distance between centres |
1080mm |
1080mm |
Headstock swivel
|
Positive locations at 00, 450, 900, 1350, 1800 & 2700 |
Positive locations at 00, 450, 900, 1350, 1800 & 2700
|
| Max swing over bed |
400mm max dia for faceplate/chuck work (unless swivelled outside bed)
|
400mm max dia for faceplate/chuck work (unless swivelled outside bed) |
| Max swing over tool rest base |
300mm max dia when turning between centres |
300mm max dia when turning between centres
|
Speed ranges
|
Two dial up ranges: high speed 0-3200 rpm or high torque 0-1200 rpm |
10 speeds: 190, 290, 450, 690, 800, 1060, 1340, 1890, 2500, 3200rpm
|
Tool Rest Length
|
360mm heavy cast iron with eccentric lock |
360mm heavy cast iron with eccentric lock |
Working Height
|
1130mm from floor to spindle centre |
1130mm from floor to spindle centre |
Head and tailstock taper
|
#2 Morse taper
|
#2 Morse taper |
Headstock spindle thread
|
M30 x 3.5
|
M30 x 3.5 |
Spindle Indexing
|
12 location holes in spindle @ 300 plus 3 in headstock casting, 200 apart
|
12 location holes in spindle @ 300 plus 3 in headstock casting, 200 apart |
End Boring Capacity
|
Hollow headstock (15mm) & tailstock (10mm) for boring lamp bases etc
|
Hollow headstock (15mm) & tailstock (10mm) for boring lamp bases etc |
| Motor |
1.5hp input single phase 50Hz - no more dying in the cut
|
1.5hp input single phase 50Hz - no more dying in the cut |
| Net Weight (approx) |
175kg - heavy construction absorbs vibration for high quality results
|
175kg - heavy construction absorbs vibration for high quality results |
| * The Manufacturer reserves the right to amend specifications without notice |
