The E series Panel Saw, from Robland

The features and performance you need at a price you'll love!

• Powerful motor - 3 or 5 hp (single or three phrase) and ¾ hp scorer
• Precise, external scorer adjustment
• 2500mm sliding table stroke
• High precision slider runs on 8 steel rails
• Sold fence guide with cast iron support
• Separate mitre fence and heavy clamp
• 300mm main sawblade for 100mm cut height
• Large cast-iron main table & plate steel frame
• Telescoping 'no-sag' cross-cut table support
• Rock solid twin flip-over cross-cut stops

Download a brochure >>

Click image to enlarge 

Features

Sliding Table

The hard anodized sliding table is precision machined and features a 410 mm wide table, and impressive 310 mm wide lower beam.

The heart of the sliding table is 8 hardened rods inserted into the aluminium table extrusions. These are 8 mm diameter and set in a square pattern to guide the steel roller bearing balls. This makes the whole system extremely wear-free and requiring almost no cleaning as the saw dust simply falls clear of these guides.

Saw Unit

Both tilt and rise and fall of the saw blade is done by hand wheel and thread bars guided directly in the cast iron nuts on the saw unit.Both 45° and 90° stops are adjustable.

The main saw is equipped with a 3.7 kW motor (3 phase) or 2.2kW (single phase), and the scoring saw unit is equipped with a 0.55 kW motor. The scoring unit allows the use of scoring saw blades of 120 mm diameter, 20 mm bore.

Scoring unit adjustments are easy to operate and are grouped together, the rise and fall of the main saw blade is done by hand wheel, the maximum cutting depth is 100 mm (max diameter saw blade is 300 mm.)

Mitre Fence

The machine is equipped with a 2 x 60 degree mitre fence, and heavy duty wood clamp which allows the wood to be held down firmly.

Parallel Fence

The hard anodized sturdy profile is mounted onto a heavy cast iron support block and can be equipped with the optional digital read-out (see below) with a precision of 0.1mm.

The cutting width is 1280mm.

Cross-cut Fence

The machine is equipped with a sturdy, hard anodized fence which telescopes out to 2500 mm, and has two flip-over stops with magnifying lenses, no room for error on the settings as a result. 

Specifications