Jigs
|
Click images to enlarge
|
 |
With the Tormek patented attachment for drill bits DBS-22 you can now sharpen your drill bits with the highest precision.
Full details >>
|
|
Knife Jig
For smaller knives (to 120mm). Width 45 mm (1¾"). Long knives need to be stiff. Min. blade length 60 mm (2 3/8").
Also for carver’s draw knives. The jig rests freely on the Universal Support so you can follow the curve of the blade.
|
|
Long Knife Jig
This new knife jig is developed especially for long and flexible knives, e.g. filleting knives, over 120mm.
Its larger width, 140 mm (5½"), stabilizes a long and thin blade and the jig copes with blades longer than 160 mm (6¼"). |
|
Scissors Jig
For scissors and shears.
The scissors is mounted in a holder, which supports freely on a support plate so you can follow the individual convex shape of the scissors.
Also for portable electric hand planer blades. |
 |
Square Edge Jig
New, patented design. For plane irons and wood chisels.
Aligns a wood chisel automatically parallel to the Universal Support.
Safety stops prevent the tool from slipping off the stone and hurt your knuckles. Max tool width 76 mm (3"). |
|
Multi-purpose Jig
For an exact replication of the shape on turning skew chisels with a straight or curved edge.
Thanks to a unique design the jig also copes with oval section skews.
Also for parting and beading tools and roughing gouges.
Straight carving gouges up to 50 mm (2") wide. Max width of skews 32 mm (1¼"). |
|
Axe Jig
For carving and carpenter’s axes.
The head of the axe supports freely on the rubber lined stop so you can follow the shape of an individual edge, straight or curved. |
|
Torlock Tool Rest
For turning scrapers, hollowing tools and thin parting tools.
Also for cabinet scrapers, screw drivers and spoke shave blades.
Fast and secure locking on the Universal Support due to the patented Torlock design, which increases the locking forced by 250%. |
|
Planer Blade Attachment
For blades of any length.
Blades longer than 270 mm (10½") are relocated in the blade holder and ground in two steps.
The grinding depth can be set within 0,1 mm (0,004"). Min width of blade 13 mm (½"). |
 |
Universal Gouge Jig
For an exact replication of the shape on fingernail shaped turning gouges.
Can be set for various lengths of the side bevel. Plus shaft for turning cutters.
Also for bent carving gouges and V-tools. Max tool width 25 mm (1"). |
|
Short Tool Jig
For straight shanked tools, such as wood chisels, carving gouges and tools for power carvers.
Flanges ensure a 90° positioning of the tools towards the grindstone.
Copes with tools down to 45 mm (1¾") length and max width 32 mm (1¼"). |
|
Moulding Knife Attachment
For all shapes and makes of moulding knives with 24, 30 or 38 mm distance between guide holes.
Sharpens the face of the blade and therefore any shapes can be done.
Max width of blades 100 mm (4"). |
