|
Virutex Lock Morticer
Specially designed for quick, precise morticing on doors or other elements, either at the work site or in the workshop.
Equipped from factory with hard metal lock mortiser bit Ø 15 mm, locking bar to make mortises on several doors at the same height, rubber protectors for delicate jobs, service keys and dust collector connection.
Watch the FC16S in action >>
|
|
 |
Its special fixing system allows the morticing of doors that have already been hung, without damaging the surface |
|
|
The machine is also able to work horizontally, which can be especially useful if deciding to make a series of mortices, with the doors unhung. |
 |
It also allows for morticing of grooved doors or those with overlap, thanks to the possibility of adjusting the centre of the machine over the section of the door where the mortise is required. |
| The FC16S incorporates a locking bar, fixed to the machine at the height of the first door, allowing the morticing of the rest of the doors without having to re-measure. |
|
 |
Specifications
|
FC16S Lock Morticer
|
Input
|
1100W
|
Maximum bit diameter
|
30mm |
| No-load speed |
23,000rpm
|
Maximum morticing depth
|
0 - 125mm
|
Maximum morticing length
|
177mm + bit ø
|
Maximum clamp vice opening
|
190mm
|
|
|
Top of page >>
<< Back to Virutex Portable Tools Menu
Virutex FR129N Router for fitting hinges
Special router for fitting hinges and all kinds of hardware for frames and doors.
Easy fitting without taking sizes and without leaving marks.
Equipped with HSS bit and guide ring for 9.5 cm hinges.
Two distributing rods for fitting 3 or 4 hinges and carrying case included.
Watch a demonstration of the FR129N Router for fitting hinges >>
|
|
|
|
<< Making the upper recess on the frame
Making the second recess on the frame >>
|
 |
 |
<< Making the first recess on the door
No need to reset the machine to make other recesses on frame or doors >>
|
|
|
Specifications
|
FR129N Router for fitting hinges |
Input power
|
750W
|
No-load speed
|
30,000rpm
|
Chuck collet
|
8mm
|
Maximum bit diameter
|
32mm
|
Maximum trimming diamter (bit ø 16mm
|
161mm x 70mm
|
Maximum trimming depth
|
11mm
|
Maximum clamp opening
|
200mm
|
Minimum clamp opening
|
33mm
|
Weight
|
4.3kg
|
|
|
Top of page >>
<< Back to Virutex Portable Tools Menu
Top of page >>
<< Back to Virutex Portable Tools Menu
|
 |
