The Virutex range of powered and hand trimmers

FR256N Edge Trimming Set >>     
FR292R Tiltable Trimmer >>
FR217S Angle Trimmer for solid surfaces >>
AU93 Double Edge Trimmer >>
RC21E Manual End Trimmer >>
RC221R Manual End Trimmer for 2mm PVC tape >>

Virutex FR256N Edge Trimming Set

Radius trimmer, for trimming edges of PVC and veneer.

• Powerful 750W motor
  
• Electronic speed adjustment and constant torque control for a constant motor speed under load. 
• Dust collection connection and three bases (hole Ø 20, 26 & 30 mm) for using with different sized bits.

	Continuous trimming of all four sides of a panel. The CA56G trimming head enables uninterrupted trimming of the four edges of a panel. It has a large support base and an auxiliary holding knob, designed to give it perfect stability.
	Special brake system to avoid damage to the panel when starting to work
	Quality finishing on the corners. Standard round trimming head also included.

Virutex FR292 Tiltable Trimmer

The only trimmer capable of trimming the excess of the panel or edge surfaces flat or at any angle, without changing the bit.

• Wide base provides effective guiding and easy trimming.
• Offers numerous additional trimming possibilities, thanks to the unique tilting and adjustment system.
• Equipped with a powerful 750 W motor with electronic speed adjustment and constant torque control for a constant motor speed under load.
• External dust collector connection.

	Copier with ball bearing. Perfect guiding on straight or curved surfaces.
	Lateral fence, avoids the irregularities of the edges can be copied.
	Guide ring for copying with template as a small router
	The tiltable motor body permits the trimming of straight edges with the cylindrical bit as well as the excess surface. Excess panel is trimmed with the motor body in the vertical position, and edges with the motor body inclined to 91.5º, i.e. at 1.5º below the board surface, thereby avoiding damage.

Virutex FR217S Angle Trimmer

Specially designed for trimming the concave radiuses in the joints between rims and work tops made of materials such as Corian or Rausolid.

• Fitted with a front feeler that prevents the rim from becoming damaged and allows for quick, easy trimming, giving a perfect finish.
• Powerful 750 W motor with electronic speed adjustment and constant torque control for a constant motor speed under load.
• Includes two special carbide bits for radius 5 and 10 mm.
• Dust collection connector

Virutex AU93 Double Edge Trimmer

Virutex RC21E Manual End Trimmer

Allows a perfect, clean and high quality cut on all the corners of the board. No other finishing operations are needed. Equipped with twin use blades. For trimming PVC, melamine, Polyester, veneer, etc. up to 0.6 mm thickness

Virutex RC221R Manual End Trimmer

For cutting the excess of tape at both ends of a panel. Cuts PVC, melamine, polyester, veneer, etc. Cuts tapes up to45 mm width and 2 mm thick. The blades can be sharpened. Option to regulate the cutting position.