The T4 Bushcraft limited edition features all the equipment needed to sharpen knives and axes straight out of the 'special value' box.

Included in the box is the Knife Jig SVM-45 and the Axe Jig SVA-170. You also get Tormek T-4’s standard accessories: the standard grindstone SG200, Stone Grader SP-650, the AngleMaster WM-200, the Honing Compound PA-70, Tormek's Handbook on sharpening and an instructional DVD.

With this equipment, you can sharpen almost every type of knife (including kitchen knives) and axes. Sharpening with Tormek is safe and give your tools a long-lasting razor edge. For more detailed information about this model, see the product page for Tormek T4.

$695.65 ex GST $800.00 inc GST Add to cart Make an enquiry

Make an enquiry about the Tormek T4 Bushcraft Westone Grinder

A cast zinc top for greater precision

The sleeves for the Universal Support are cast in the zinc top. This, together with the Tormek stadium-shaped design of the holes (patent pending), means the precision of this grinder has been improved by 300% compared to the T3 model.

SG200 Grindstone

Tormek's original grindstone, and the one that comes as standard on your T4. The SG200 Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. This stone efficiently cuts all types of tools and steel qualities, including HSS.

SVM45 Knife jig

The Tormek Knife Jig SVM45 is suitable for sharpening all kinds of knives; household knives, chef’s knives, craft knives and knives for hunting and fishing. You can also sharpen carver’s drawknives.

As the jig rests freely on the Universal Support you can follow the curve of the blade.

Including the Axe jig SVA170

With the Tormek Axe Jig SVA170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.

Leather honing wheel

The leather honing wheel gently removes the burr which develops during grinding and polishes the bevel. It is used together with the Honing Compound PA-70.

 

Why Tormek?

  • Sharpen all your edge tools

With the wide range of Tormek patented jigs, you can sharpen practically all types of edge tools. Tormek is dedicated to developing water cooled sharpening through innovative solutions.

  • Exact replication

The key word when sharpening the Tormek way is repeatability. You can shape the tool exactly to your needs. Even complicated shapes such as fingernail turning gouges, spoon carving gouges and oval skew chisels with a radiused edge are easily sharpened.

  • Cleanest edges

You finish the sharpening process by honing and polishing the edge on the leather honing wheel. You get a razor sharp edge.

  • Fast sharpening

Once the shape is created, you remove only a fraction of the steel when re-sharpening, which makes it a quick job.

  • Full control

At the low speed, you have full control of the sharpening and remove no more steel than necessary. An extra benefit is that your tools last longer.

  • No risk of overheating

There is no risk that the edge becomes overheated and loses its hardness.

  • Safe and quiet

Worn steel particles are deposited into the water trough, keeping the air clear of grinding dust. No sparks are produced, avoiding a potential fire hazard in workshops with a lot of wood dust. You will also find that the Tormek runs surprisingly quietly.

  • Quality and performance

Buying a Tormek is a safe investment in quality and performance with a 7 year warranty. You are assured that all future developments will fit your machine.

 

*When used for commercial, industrial or educational purpose, the T4 warranty is 2 years.

Housing Zinc cast top, impact resistant ABS plastic
Grindstone 200 × 40mm (8" × 1 5/8")
Leather honing wheel 145 × 26mm (5 3/4" × 1")
Rise & fall 30min/hour
Table size 120rpm
Motor 120W (input)
Noise level Near silent running, 54dB
Weight 9.8kg including grindstone

Specifications are subject to change without notice.

T4 Bushcraft Westone Grinder
T4 Bushcraft Westone Grinder
T8 Wetstone Grinder
T8 Wetstone Grinder
Housing Zinc cast top, impact resistant ABS plastic Zinc cast top and frame. Sides in ABS plastic
Grindstone 200 × 40mm (8" × 1 5/8") 250 × 50mm (10" × 2")
Leather honing wheel 145 × 26mm (5 3/4" × 1") 220 × 31mm (8 5/8" × 1 1/4")
Table size 120rpm 90rpm
Noise level Near silent running, 54dB Near silent running, 54dB
Weight 9.8kg including grindstone 14.8 kg