Tormek’s new T8 guarantees precision, especially when combined with the new SE77 square edge jig (which is included) .The revolutionary fully cast housing ensures minimal play for the Universal support, giving you the best conditions possible to succeed with your sharpening. Tormek's unique drive system is efficient and manages to hold a constant speed, even under full load.

The Tormek original grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing.

There is no better sharpening system on the market, and we have never heard of an unsatisifed Tormek owner. If you don't believe us, do some web research and you'll find thousands of happy Tormek users.

Price: $1,126.09 +GST Make an enquiry

Make an enquiry about the Tormek T8 Wetstone Grinder

Fully cast housing

On the new T8 model Tormek has integrated the previous mounted sleeves for the Universal Support into the fully cast housing.

Integrated sleeves for minimal play

The integrated sleeves guarantee minimal play for the Universal Support; an innovation which improves the control of the sharpening and increases the accuracy of the final results.

Magnetic scraper for efficient cleaning

New screw lift for easier fitting of the Advanced Water Trough

Stainless steel hardware

Prevents rust and wear on bearings.

With Tormek EzyLock, you need no tools for mounting and dismounting the stone.

Full set of accessories included

The T8 comes as standard with the following accessories:

SE77 Square Edge Jig

TT50 Truing and Dressing Tool

SP650 Stone Grader

WM200 AngleMaster

PA70 Honing Compound

HB10 Handbook

Tormek DVD

Just like Tormek's T7 model, the T8 improves the accuracy and safety in edge tool sharpening.

Conventional jigs on the market require that you align the tool in the jig with two mounting screws, which is time consuming, and you lose the exact repeatability at each sharpening. TheTormek Square Edge jig solves this problem and the chisel will be lined up squarely (i.e. at 90 degrees) each time, without any adjustments. This is achieved because the jig automatically aligns the chisel to its flat, machined face.

Another benefit is that the SE77 can also clamp short and tapered tools firmly, e.g. Japanese chisels. The jig copes with blades up to 76mm or 3" width.

The new Square Edge Jig SE77 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers.

A further development is the Truing and Dressing Tool TT-50 with screw feed. This enables the user to keep the stone in perfect condition, which is essential for a perfectly sharpened edge.

The T8 comes as standard with the following accessories:

  1. SE77 Square Edge Jig
  2. TT50 Truing and Dressing Tool
  3. SP650 Stone Grader
  4. WM200 AngleMaster
  5. PA70 Honing Compound
  6. HB10 Handbook
  7. Tormek DVD

The T8 comes with a rock-solid 7 year warranty, including commercial use. 

Housing Zinc cast top and frame. Sides in ABS plastic
Grindstone 250 × 50mm (10" × 2")
Leather honing wheel 220 × 31mm (8 5/8" × 1 1/4")
Stone diameter indicator Yes
Main shaft in stainless steel Yes
Stone locking Stainless steel EzyLock
Water trough With magnet scraper and water chute
Carrying handle Yes
Quick coupling for the honing wheel Yes
Motor duty Continuous
Table size 90rpm
Noise level 54dB

Specifications are subject to change without notice.

T8 Wetstone Grinder
T8 Wetstone Grinder
Housing Zinc cast top and frame. Sides in ABS plastic
Grindstone 250 × 50mm (10" × 2")
Leather honing wheel 220 × 31mm (8 5/8" × 1 1/4")
Stone diameter indicator Yes
Main shaft in stainless steel Yes
Stone locking Stainless steel EzyLock
Water trough With magnet scraper and water chute
Carrying handle Yes
Quick coupling for the honing wheel Yes
Motor duty Continuous
Table size 90rpm
Noise level 54dB